随着导轨式升降平台http://www.shengjiangji168.com/的使用率大幅增加，人们对安全性能和舒适性能的要求也越来越高，导轨式升降平台中的护栏是高空作业时重要的保护措施，下面济南航天升降机械的专家给大家详细分析一下导轨式升降平台对护栏的要求有哪些？

1、导轨式升降平台护栏可采用实体钢板、冲孔钢板、焊接或编织网等制作，严禁偷工减料，在基础上平台和对升降通道周围应设置护栏，轻便型可采用其他措施进行围护。
Guide rail type lifting platform guardrail can use solid steel plate, steel punching, welding or woven net production, it is strictly prohibited to cut corners, the platform on the basis of and around the lifting channel should be parapet, portable and other measures can be adopted to the envelope.

2、导轨式升降平台护栏应能承受水平方向垂直围栏施加的350N作用力而不产生永久变形，该物体为扁平等边正方体，边长50mm,边缘倒圆半径为3mm。
Guide rail type lifting platform guardrail should can bear external force applied to the horizontal direction perpendicular to the fence and without permanent deformation, the object is a flat equilateral cube, 50mm in length and edge rounding radius is 3mm.

3、当导轨式升降平台附件或操作箱位于施工电梯护栏内部时，应另设置专用区域与其隔离，并安装锁紧门，围栏门应装有机电联锁装置，使平台只有位于底部规定位置时围栏门才能开启，且在门开启后平台不能启动。
When the guide rail type lifting platform attachment or operation box is located in the interior of the construction elevator rails should be another set of special area and isolation, and install the lock the door, fence door should equipped with mechanical interlock device, the platform only in defined positions of the bottom of the fence door can be opened and in door open platform can not be started.

4、导轨式升降平台http://www.shengjiangji168.com/护栏的正常高度不应低于900mm，护栏正常间隙在60mm左右，不能间隔太大，除非客户有规定。
Rail type lifting platform for the normal height of the fence should not be less than 900mm, the normal clearance of the fence in the 60mm or so, can not be too large, unless the customer has a specified.